What issues Should Be Paid Attention to When Decorating Aluminum-Plastic Panels?

Aluminum Composite Panel is a wall material often used when decorating walls in homes. Aluminum-plastic panels have many advantages, which make them have a good position in wall decoration. The color of aluminum composite panel is generally very bright, very conspicuous, and the surface is very smooth. When buying aluminum-plastic panels, you must choose a good brand of aluminum-plastic panels. The Aluminum-Plastic Panel Supplier tells you what issues should be paid attention to when decorating the aluminum-plastic panel.

Aluminum-plastic panel decoration instructions

First of all, the base surface of the board should be dry and flat, and the bottom layer should be multi-layer board and blockboard to prevent cracking and deformation.

Secondly, when pasting the aluminum-plastic panel, pay attention to the glue application must be even, after the super glue thinner volatilizes, you can paste it without sticking your hands by hand, and tap it with a wooden hammer.

Third, pay attention to dividing the Aluminum-Plastic Panel into several pieces according to the design requirements when using it. It is not suitable to use the whole sheet or a large area, otherwise it will easily cause the empty drum to open the glue.

Fourth, the joints and grooves of aluminum-plastic panels are generally sealed with glass glue. The glass glue must be uniform and full when injecting and sealing. After drying, the surface must be cleaned to make the line thickness consistent.

Aluminum-Plastic Panel

Installation requirements for aluminum-plastic panels

1 Check the quality of the skeleton

The focus is to check whether the boom is straight and the force is uniform, the distance between the keels is not more than 500mm, and the wet environment requires that the distance be appropriately reduced, the lower surface of the keel is smooth and has no feeling of falling, and the main and accessories are tightly and firmly connected. Construction can only be confirmed if qualified.

2 Cutting aluminum composite panel

Along the cutting and breaking, the aluminum-plastic board keeps the edges straight and square, without any defects such as missing or missing feet.

3 Laying of aluminum-plastic panels

Start laying at the corner or the middle of the board. It is not advisable to lay at the same time. During laying, the aluminum-plastic board should be tightly connected, but no strong pressure is allowed. The board seam is required to be straight, consistent in width and narrow, and no staggered seams.

If you have any questions about aluminum-plastic panels, aluminum-plastic panel brands, and Aluminum Composite Panel Manufacturers, please contact us.